[ Home | Contents | Search | Post | Reply | Next | Previous | Up ]
From: Chris
Date: 26 Dec 2001
Time: 21:58:25
Remote Name: 203.29.186.232
Hi there, I have a Cannon BJC 2000SP Printer, but the cartridge wont park on the extreme R/H side. It keeps returning to the centre, after being turned on, it moves to the left 2 inches, then the right 2 inches, stays there for about 5 seconds, the rollers move briefly, then it just returns to the centre. I have installed the latest win 2k driver for it, replaced the cartridges, but it flatly refuses to park to the extreme right as it should. The door switch appears to be working ok. In the cannon software maintaiance selection, it keeps saying "printer not responding", after pressing clean or nozzle check, This problem seemed to occur after I changed the 2 inks. Many thanks for any help